Discount Tools

Mitsubishi Materials VCHFRB Series High Feed Solid Carbide End Mill

2- NIAGARA solid carbide high performance END MILLS 3/4” inch 3 flute NEW $149.99

2- NIAGARA solid carbide high performance END MILLS 1 inch 3 flute NEW $220.00

2- NIAGARA solid carbide high performance END MILLS 1” inch 3 flute NEW $349.00

SGS 3 flute solid carbide 1 inch end mill new ser 60 $225.00

3/4 INCH SOLID CARBIDE 90 DEGREE COUNTERSINK , 6 FLUTE , FULLERTON $9.99

3/4 INCH SOLID CARBIDE 82 DEGREE COUNTERSINK , 6 FLUTE , FULLERTON $9.99

5/8 INCH SOLID CARBIDE 82 DEGREE COUNTERSINK , 6 FLUTE , FULLERTON $9.99

NEW Champion SE5NF Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Dia $41.56

Solid carbide, 1/8 inch diameter, 2 flute plunge $15.50

(#2254) New Machinist .250 of an Inch Solid Carbide Reamer $15.99

Cutters 1/2 inch Solid Carbide..!! $15.00

3/4 Inch Solid Carbide Endmill….!! $19.00

Bosch 85286MC 1/4 Inch Solid Carbide Bevel Trimmer Bit $15.99

3 Used Solid Carbide end mills 1 inch diameter 4 flute $50.00

NEW BOSCH 85936M Solid Carbide 58 Inch x 2 Inch Up Spiral Double Flute 58 Inch S $93.70

NEW Champion SL3NF Titanium Nitrite Coated Burs Solid Carbide 38 Inch Cutter Dia $44.55

NEW Champion SF5L6 Titanium Nitrite Coated Burs Solid Carbide 6 Inch Length 12 I $50.24

1 INCH OD. SOLID CARBIDE END MILL 5″ OVERALL X 7/8 CUT LENGHT USED V-GOOD $39.00

VHEM 5/8 INCH OD BY 3-1/2″ LONG SOLID CARBIDE 4 FL. END MILL USED V-GOOD $25.00

19/64″ inch Solid Carbide Jobber Drill Bit SOLD EACH $19.99

15/64″ inch Solid Carbide Jobber Drill Bit SOLD EACH $19.99

NEW Champion SF5 Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Diame $35.25

NEW Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit 14 Inch $36.92

NEW Champion SC3L6 Titanium Nitrite Coated Burs Solid Carbide 6 Inch Length 38 I $35.34

NEW Champion SE3L6 Titanium Nitrite Coated Burs Solid Carbide 6 Inch Length 38 I $37.16

NEW Champion SL4 Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Diame $35.13

NEW Champion SD5NF Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Dia $39.01

1/2 INCH SOLID CARBIDE COOLANT HOLE DRILL (HOUSE123) $200.00

New Porter-Cable 43210 1/8-inch Solid Carbide Straight Bit $19.93

5 INCH OD BY .050 BY I” ID SOLID CARBIDE SAW BLADE USED VERY GOOD SHARP COND. $45.00

NEW 1″ INCH DIA KENNAMETAL SOLID CARBIDE 4 FLUTE END MILL- USA MADE – FREE SHIP $110.00

NEW 1″ INCH DIA MASTERCUT SOLID CARBIDE 4 FLUTE END MILL – USA MADE – FREE SHIP $90.00

NEW 3/4″ INCH DIA MORSE OR CLEVELAND 4 FLUTE SOLID CARBIDE END MILL – USA MADE $75.00

NEW 11/16″ INCH DIA MORSE SOLID CARBIDE 4 FLUTE END MILL – USA MADE – FREE SHIP $80.00

NEW 9/16″ INCH DIA MORSE, CLEVELAND OR SUPER TOOL SOLID CARBIDE 4 FLUTE END MILL $45.00

BOSCH 85937M SOLID CARBIDE 2 FLUTE UPCUT SPIRAL USA 3/4 INCH $50.00

NEW 1/2″ INCH DIA KENNAMETAL SOLID CARBIDE 4 FLUTE END MILL-DOUBLE END-USA MADE $40.00

NEW 5/8″ INCH DIA MORSE SOLID CARBIDE 4 FLUTE END MILL -USA MADE -FREE SHIP $40.00

NEW 1/4″ INCH DIA MORSE SOLID CARBIDE 4 FLUTE END MILL – DOUBLE END -TICN COATED $25.00

NEW 1/4″ INCH DIA CLEVELAND SOLID CARBIDE 4 FLUTE END MILL-DOUBLE END -FREE SHIP $27.00

NEW 3/16″ INCH DIA CLEVELAND SOLID CARBIDE 4 FLUTE END MILL-DOUBLE END-FREE SHIP $23.00

NEW 3/8″ INCH DIA CLEVELAND SOLID CARBIDE 4 FLUTE END MILL-DOUBLE END -FREE SHIP $28.00

NEW 3/8″ INCH DIA CLEVELAND OR METAL REMOVAL SOLID CARBIDE 4 FLUTE BALL END MILL $25.00

NEW 5/16″ INCH DIA METAL REMOVAL SOLID CARBIDE 4 FLUTE END MILL – DOUBLE END $30.00

NEW 1/2″ INCH DIA METAL REMOVAL SOLID CARBIDE 4 FLUTE END MILL – DOUBLE END $80.00

NEW 7/32″ INCH DIA CLEVELAND SOLID CARBIDE 4 FLUTE END MILL -USA MADE -FREE SHIP $15.00

NEW MLCS 7468 12 Inch Diameter Solid Carbide Upcut Spiral Router Bit $45.99

SOLID CARBIDE END MILL BALL NOSE 5/16 INCH DIA, LONG $14.00

SOLID CARBIDE DRILL 8mm DIAMETER (.315) 8 INCH LONG $45.00

SOLID CARBIDE DRILL 19/64 DIAMETER (.2969) 6 INCH LONG $15.00

SOLID CARBIDE DRILL 15/64 DIAMETER (.2344) 6 INCH LONG $14.00

Router bit 1/4 inch 2 flute solid carbide $20.00

SOLID CARBIDE END MILL BALL NOSE 1 INCH DIAMETER LONG $135.00

Solid Carbide End mill 3/4″ inch $45.00

Mens Tungsten Carbide Metal Chrome Link Bracelet 8 Inch Wholesale New Mans Solid $68.50

NEW CMT 191.000.02 5 Piece Solid Carbide Upcut Spiral 14 Inch 12 Inch Shank Rout $202.75

NEW Kempston 90433 Up Spiral Router Bit Solid Carbide 12 Inch Shank 38 Inch Cutt $45.69

NEW CMT 192.000.02 5 Piece Solid Carbide Downcut Spiral 14 Inch 12 Inch Shank Ro $240.94

Solid carbide bevel trim bit with pilot 1/4 inch $10.00

6 INCH SOLID CARBIDE GROUND KNIFE OR GUIDE BAR CUTTER $35.00

NEW Champion SC5NF Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Dia $38.66

1″ inch ball end mill solid carbide 99% new TiAlN coated, SGS, 4 flute $178.83

NEW Champion SG5 Titanium Nitrite Coated Burs Solid Carbide 12 Inch Cutter Diame $32.35

5/8″ inch ball end mill solid carbide NEW, Atrax, 2 flute $64.85

DRILL POINTED SOLID CARBIDE CHUCKING REAMER/DRILL 6 INCHES CUT DIAMETER 0.249 ” $10.00

DRILL POINTED SOLID CARBIDE CHUCKING REAMER/DRILL 6 INCHES CUT DIAMETER 0.189″ $8.00

DRILL POINTED SOLID CARBIDE CHUCKING REAMER/DRILL 6 INCHES CUT DIAMETER 0.162″ $7.00

Phiten Titanium Star Black Necklace 18 $24.00 Phiten’s patented Energy Transport System (ETS) enables the body to realize its maximum potential. Phiten’s unique technology helps to reduce fatigue, tension and stiffness caused by stress or exercising. All Phiten products have undergone the ETS treatment. Sought after by thousands of professional athletes all around the world, Phiten products support their body while pushing themselves beyond t…

Skil 3600-02 120-Volt Flooring Saw $142.25 The portable, multifunctioning SKIL 3600-02 120-Volt Flooring Saw has the ability to make miter, cross, and rip cuts in many types of flooring materials. Designed to cleanly cut through hardwood, laminate, and engineered flooring up to 8 inches wide and 3/4-inch thick, this saw is perfect for all wood flooring projects.120-Volt Flooring SawAt a Glance:Lightweight and easy to use for DIY wood floor…

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece $69.95 Three SOLID MICROGRAIN CARBIDE bits for fast, smooth cuts and an edge that stays sharp longer. Spiral Bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove. They work well for deep mortises, cutting dadoes in a router table, and any edge treatment done with the work facing upward. Includes the following diameter UPCUT Bits: 1/4″ D (1″ …

Astro Pneumatic 2181 Double Cut Carbide Rotary Burr Set with 1/4-Inch Shank $49.99 SA-5: Cylindrical shape 1/2″ x 1″ SA-3: Cylindrical shape 3/8″ x 3/4″ SC-3: Cylindrical radius end 3/8″ x 3/4″ SC-1: Cylindrical radius end 1/4″ x 5/8″ SD-1: Ball shape 1/4″ SD-3: Ball shape 3/8″ SF-3: Tree shaped radius end 3/8″ x 3/4″ SF-5: Tree shaped radius end 1/2″ x 1″ All above burrs are 1/4″ shank, USA standard Blow molded storage case…

Cable assembly (5 feet, rohs, rs, 9d, s, safri, tst pt, e/p) Cbl asy,rohs,rs,9d,s,safri tst pt,e/p,5′…

8.5 Inch Tungsten Carbide Bracelet $429 8.5 Inch tungsten carbide bracelet.

Solid Carbide Acrylic Router Bits $19.81 Solid Carbide Acrylic Router Bits

SPIKES Tungsten Carbide Solid Double Bar Link Bracelet $133.5 SPIKES Tungsten Carbide Solid Double Bar Link Bracelet Show off your style with the tungsten carbide double bar link bracelet. This fashionable bracelet will complete any outfit. SPIKES stainless steel jewelry is a trendsetting 316L jewelry collection created for today’s stylish men and women who want leading-edge jewelry designs. Specifications: 9.06 Inch Length, .28 inch Width, Tungsten Carbide

Solid Carbide Flush Trimmer Router Bits $8.56 Solid Carbide Flush Trimmer Router Bits

Solid Carbide Self-Pilot Bevel Router Bits $12.48 Solid Carbide Self-Pilot Bevel Router Bits

Carbide Ammo $8.98 Carbide Ammo is for both the 25 Inch Field Cannon 7389 and for the 17 Inch Field Cannon 7384. Each tube of ammo produces over 100 shots.

Solid Carbide Drill #36 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #38 Solid Carbide Drill $29.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #50 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #56 Solid Carbide Drill $19.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #29 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #31 Solid Carbide Drill $26.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #33 Solid Carbide Drill $20.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

Solid Carbide Drill #28 Solid Carbide Drill $28.99 Specially ground single-flute solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). • Cuts a clean chip in hardest file steel giving true hole. • Does not "crumble out" the steel; thus no chatter. • 2" long to give quill clearance when using with Forster and other scope/sight mounting jigs. • Kept properly cleaned will not bind or break. • Properly fed won’t work-harden hole surface like spade drill does; decreases tap breakage. • Drills "all the way through" hardened steels. Note: Common sense must be used. No guarantee against breakage! Use only to crack the skin Mfg: Brownells SPECS: Sizes available: No. 56 (0-80) No. 50 (2-56) No. 38 (5-40) No. 36 (6-32 No. 33 (6-40) No. 31 (6-48) No. 29 (8-32) No. 28 (8-40). Speed approximately twice that of high speed steel feed rate the same or slightly less.

M.A. Ford Solid Carbide Burrs #1 Foredom Solid Carbide Burr $19.99 M.A. FORD SOLID CARBIDE BURRS Mfg: Brownells SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8′ (3.2mm) shank; All cutting surfaces are ¼" (6.3mm) dia. with lengths as follows: #1 = 9/16" (14.3mm) and #2 = ½" (12.7mm).

M.A. Ford Solid Carbide Burrs #2 Foredom Solid Carbide Burr $19.99 M.A. FORD SOLID CARBIDE BURRS Mfg: Brownells SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8′ (3.2mm) shank; All cutting surfaces are ¼" (6.3mm) dia. with lengths as follows: #1 = 9/16" (14.3mm) and #2 = ½" (12.7mm).

Festool 484515 HW 82 SD Solid Carbide Standard Spiral Blade $31 Solid Carbide Standard Spiral Blade – HW 82 SD – 484515

Dewalt 1 Inch Carbide Drill Bit(Pack Of 6) $92 Dewalt 1 inch carbide drill bit. 1 inch diameter 12 inch overall length. Bulk packed. Made in germany. 1/2 inch standard straight shank. Carbide tip. These are not stamped dewalt but are authentic….

Pferd – Tungsten Carbide Bur Bits $23.3 Heavy-duty tungsten carbide bur bits. Pferd Tungsten Carbide Bur Bits Carbide burs made with submicrograin solid carbide Comes with a radius cylindrical, plain cylindrical or tree radius end shape With alternate diamond cut type design on head Ideal for heavy-duty uses in foundries, steel construction and shipyards

Carbide Flex Tips $14.9 Leki has created Universal Carbide Flextips, flexible synthetic tips that can “flex” us to 30 degrees without damaging the pole shaft. Beyond that point the tip will “break” off to save the lower shaft from damage. The Universal Carbide Flextip may be changed easily if broken or worn by simply knocking it off the shaft with a quick snap, apply the new tip, and tap down to secure.The use of carbide in the steel jacket of the Universal Carbide Flextip reaches a degree of hardness close to that of a diamond thus giving you a solid plant in all conditions.*The Carbide Flextips fit all Leki Fitness and Trekking Poles.Sold in pairs

Bosch 85282 Solid Carbide Veining Bits $10.12 Bosch 85282 Solid Carbide Veining Bits Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch 85282 Solid Carbide Veining Bits Specifications: A. Overall Diameter:3/16″ B. Cutting Edge Length:25/64″ C. Shank Diameter:1/4″ D. Overall Length:1-1/2″

Carbide Wilson Dovetail Cutter Carbide Wilson Dovetail Cutter $75.99 Solid carbide 2" (5cm) long. .375" (9.5mm) diameter shaft. 60° shoulder. Mfg: Brownells

Tungsten Carbide Wedding Ring $49.95 Tungsten Carbide Wedding Ring. Find what you are looking for from our incredible selection of bands for all occasions. Ring Information Tungsten Sizes 8-12 available 8mm (5/16 inch) Polished Finish Precise Laser Engraving Available

Dremel 1149903 18 Inch Tungsten Carbide Cutter $23.64 Applicable Materials: Stainless Steel Hard Steel Cast Iron Ceramics NonFerrous Soft Metal Plastic. Cutting Edge Material: Carbide. Speed: 35000 rpm [Max]. Type: Dremel Bit. Cutter Diam: 1/8 in. Shank Diam: 1/8 in.

Dremel 1149901 18 Inch Tungsten Carbide Cutter $23.64 Applicable Materials: Stainless Steel Hard Steel Cast Iron Ceramics NonFerrous Soft Metal Plastic. Cutting Edge Material: Carbide. Speed: 35000 rpm [Max]. Type: Dremel Bit. Shank Diam: 1/8 in. Cutter Diam: 1/8 in.

Dremel 1149909 18 Inch Tungsten Carbide Cutter $23.64 Applicable Materials: Stainless Steel Hard Steel Cast Iron Ceramics NonFerrous Soft Metal Plastic. Cutter Diam: 1/8 . Cutting Edge Material: Carbide. Shank Diam: 1/8 . Speed: 35000 rpm [Max]. Type: Dremel Bit.

Festool 484520 HK 82 SD Standard Smooth Planer Head with Solid Carbide Spiral Blade $135 HK 82 SD Standard Smooth Planer Head – 484520. Solid Carbide Spiral Blade – 484515